You are here: home / Products / Intelligent LED Traffic Signals / 12-inch Signal    

12-inch (300mm) LED Signal

    FEATURES & BENEFITS :
  • Designed as a Direct Replacement for Incandescent Bulb or Retrofit for other "standard" LED Signals
  • Fits into Existing Signal Head & Utilizes all Existing Parts Except "Bulb" Reflector
  • Generates less scrap than any other LED Signal when replacing Incandescent Bulb
  • Longest Warranty Offered for LED signals; 8 years for Red & Green & 10 years for Yellow
  • Lowest "Cost-Of-Ownership" of all LED Signals when analyzed over a 8 year or longer period
  • Available with screw base "bulb" socket connection or color coded 40" wire with insulated quick connections
  • Auto-Sensing Auto-Switching AC/DC Power Supply (80V AC - 135V AC & 35VDC - 60VDC)
  • Failure of a single LED results in loss of light from that LED only
  • 10KA @ 10KV Transient Voltage Protection exceeds ITE VTSCH-STD Part 2 Specification and is non-degradable unlike all other competitor circuits
  • Electronics are convection cooled which extends life of the signals
  • Designed so signal can be "Refurbished" and put back into service after the end of the warranty period if unit has failed
  • "Refurbished" Signal Warranty of an additional 6 years for Red & Green and 8 years for Yellow
  • Designed so signal is "Technology Upgradable"
     
   








 
OTHER PRODUCTS  
 

 
   

GENERAL SPECIFICATIONS:

  • Meets ITE VTSCH-STD Part 2 Specification for Chromaticity
  • Operating Temperature Range: - 40 to + 74 deg. Celsius
  • Operating Voltage: AC Voltage: 80 to 135 V @ 60Hz AC; DC Voltage: 35 to 60 VDC
  • Meets or Exceeds ITE VTSCH-STD Part 2 Specification for Luminous Intensity
  • Meets NEMA STD 250 Type 4 - 1991 Specification for Moisture Resistance
  • Meets Mil-STD-883 Method 2007 Specification for Mechanical Vibration
  • Meets FCC title 47 Sub. B Sec 15 Specification for Electronic Noise
  • Exceeds ITE VTSCH-STD Part 2 Specification for Transient Voltage Protection
  • Meets NEMA TS-2-1992 Specification for Controller Compatibility

      
   

OPTIONAL FEATURES:

  • Self-Kill: Meets the ITE VTSCH-STD Part 2 Specification for "Failed State Impedance" Option
  • Night Dimming for Red & Green Signals: Meets ITE VTSCH-STD Part 2 Specification for Dimming Option
  • Communications:
    • RS 232/485 back to the controller
    • 900Mhz radio to the ITIS S.A.P.S. unit (see ITIS Section for information on S.A.P.S.)
    • 900 Mhz radio communications to a radio receiver installed in the intersection controller

    These communication options allow for each signal with this option installed to communicate it's ongoing operational status to a central office database. This can be done through the USA Signal ITIS system S.A.P.S. unit or through the intersection controller if it has the I/O capability. When included in a USA Signal ITIS the software is provided as part of the system that lets the DOT management see action day to day status of all signals installed. With this system such key items as scheduling maintenance for signals that have degraded past the ITE light output specification can be done in a "real-time" mode.

Product Detailed Information:

Click Here for Datasheet